Thermo Reactive Sealer
  • Home
  • What is TRS?
  • Types of Damage
    • Delamination
    • Dusting
    • Efflorescence
    • Pop Outs
    • Spalling
    • Surface Scaling
  • TRS Case Study
  • How to Apply TRS
  • Contact Us
  • Docs
    • Warranty Information
    • SDS Sheet
  • TRS Applicators Only

How to Apply Thermo Reactive Sealer

To properly apply Thermo Reactive SealerTM, you will need to:

  1. Clean the surface with a deep cleaning surface cleaner or wand wash using hot water.
  2. Allow the surface to dry or vac ‘n dry the surface.
  3. Apply TRS using a sprayer & roller.
  4. Allow TRS to set. The surface is ready for foot traffic in 4 hours and automobile traffic in 8 hours.

Click Photos to Enlarge

Pre-TRS Treatment Area
Prepare the Surface by Deep Cleaning
Deep Clean Surface with a Surface Cleaner
Use Hot Water with a Deep Clean Surface Cleaner
Clean the Surface Using a Hot Water High Pressure Wand
Allow Surface to Dry or Vac 'n Dry Surface
Apply TRS
Apply TRS
Apply TRS
Apply TRS
Apply TRS
Apply TRS
Apply TRS
Allow TRS to Set & Dry
Allow TRS to Set & Dry
Surface is Ready for Foot Traffic in 4 Hours
Surface is Ready for Automobile Traffic in 8 Hours
TRS Results - A Renewed & Protected Surface!
TRS Results - A Renewed & Protected Surface!
TRS Results - A Renewed & Protected Surface!
TRS Results - A Renewed & Protected Surface!
TRS Results - A Renewed & Protected Surface!
© ThermoReactiveSealer.com - Power Line Industries, Inc. - All Rights Reserved
  • Facebook
Scroll to top